If you have a dent in your car, the first question is usually the simplest one: what is this going to cost? With paintless dent repair (PDR), the honest answer is that it depends on the dent. A small round ding in the middle of a door is a very different job from a long crease across a body line or a roof covered in hail.
The good news is that you don’t have to guess. Below we explain exactly what affects the price, why PDR usually costs less than traditional bodywork, and how to get an exact quote for your dent without driving anywhere.
What affects the cost of paintless dent repair?
Every PDR quote comes down to how much time and skill it takes to work the metal back to straight. These are the factors that move the price:
1. Size and depth
A shallow dent the size of a coin can often be pushed out quickly. A deeper or wider dent has more metal to move and takes more careful work, so it costs more.
2. Sharpness
Soft, rounded dents are the easiest to repair. Sharp dents, where something hit the panel with a small point, stretch the metal more and take longer to finish cleanly.
3. Location on the panel
Dents in the flat middle of a door or fender are usually the most straightforward. Dents on a body line, near the edge of a panel, or close to a roof rail take more time because the metal is shaped and stiffer in those areas.
4. Access behind the panel
PDR works by reaching behind the panel with rods and picks. If there is a brace, a double layer of metal or a component in the way, we may need to remove trim, a tail light or an interior panel to reach it. More access work means more time.
5. Number of dents
One door ding is a single repair. Several dents on one panel, or hail across the hood, roof and trunk, are priced on the total amount of work.
6. Paint condition
PDR is for dents where the paint is still intact. If the paint is cracked or chipped, the metal can often still be fixed with PDR, but the paint damage needs separate attention. In that case we’ll tell you up front and explain your options, including bodywork and paint if it’s the better fit.
Why PDR usually costs less than a body shop
Traditional dent repair often means sanding the area, applying filler, priming, painting and blending the new paint into the surrounding panels. Each step adds labour and materials, and the car can be off the road for days.
Paintless dent repair skips all of that. There is no sanding, no filler and no repaint. The metal is pushed back into shape from behind, so your original factory finish stays on the car. Most single dents take about one to three hours, and many repairs are done the same day.
Keeping the factory paint also matters later. Original paint is one of the things buyers and appraisers look for, and a PDR repair leaves nothing to find.
Does mobile repair change the price?
We fix dents at our Maple Ridge shop or at your home or workplace across the Lower Mainland, including Pitt Meadows, Coquitlam, Port Coquitlam, Langley, Surrey and Mission. Your quote will tell you what’s involved for the repair you choose. If a job is better done in the shop, such as heavy hail that needs full lighting, we’ll let you know when we quote.
Why we don’t publish a price list
Two dents that look similar can be very different jobs once you account for location, access and sharpness. A flat price list would either overcharge you for a simple ding or leave out the details of a harder one. Instead, we look at your actual dent and give you an exact price.
How to get an exact quote from a photo
Getting a price takes a few minutes. Send us three photos:
- One close-up, taken straight on
- One from a few steps back, so we can see where the dent sits on the panel
- One at an angle, so the light shows the shape of the dent
Daylight works best. Putting a coin or a key next to the dent helps us judge its size. We’ll reply with a price and a time estimate. The quote is free, and there’s no obligation to book.
Is it worth fixing a small dent?
A dent with intact paint won’t usually get worse on its own, but it does affect how the car looks and what it’s worth when you sell or trade it in. If the paint has a chip in it, it’s worth dealing with sooner so moisture doesn’t get into the bare metal. Either way, a photo quote costs nothing and tells you exactly what you’re looking at.
Send a photo of your dent for a free estimate. Request your quote or call 778-855-5754.



